Mr Torque Tool Reviews

4.9 Rating 16 Reviews

Mr Torque tool kit. This kit multiplies leverage from a normal ratchet. The tool is for use on flywheel gland nuts with both 6 and 12 volt flywheels and 36mm rear hub nuts. Supplied as a complete kit including the drum plate, 6 Volt gear and 12 Volt gear.

Visit Product Page

Phone:

01273 444 000

Email:

help@heritagepartscentre.com

Location:

47, Dolphin Road, Shoreham-by-Sea
BN43 6PB

Visit Product Page

Author didn't leave any comments.

Helpful Report

Posted 11 months ago

Michael Stork

Verified Reviewer

“This is best tool a Beetle owner could have. I tried to remove my axle nuts and destroyed a breaker bar. This tool was so easy to use and axle nuts undone with little effort. Highly recommend.”

Helpful Report

Posted 1 year ago

“Seems well-made. I haven't used it yet, so can't comment further. I'm only submitting this review as I need to review another item from the same purchase and can't leave this field blank.”

Helpful Report

Posted 1 year ago

Claude Welter

Verified Reviewer

“Perfect tool for removing flywheel”

Helpful Report

Posted 2 years ago

“Best purchase ever, this tool is worth the cost as it makes the job very easy so saving time too”

Helpful Report

Posted 2 years ago

Kevin Shepherd

Verified Reviewer

“Absolutely brilliant bit of kit. Made getting the drum nut off so easy with a 14" breaker bar....no bouncing up and down on a 6' bar! As for doing the nut up, used a normal torque wrench set at 24 ft lb. Yes it cost a few pounds, but I paid a mechanic £110 to change a drive shaft oil seal a while back. So it has more or less paid for itself already.”

Helpful Report

Posted 2 years ago

“use on the flywheel to replace the oil seal made it an easy job to take off and replace bit expensive but worth having in your toolbox”