Citroen Relay Prestige Curtain Kit x1 Window Reviews

3 Rating 2 Reviews

Visit Product Page

Phone:

0116 441 7550

Email:

info@vanpimps.co.uk

Location:

Unit 1 Manor Drive, Sileby, Loughborough
Leicestershire
LE12 7RZ

Visit Product Page

“As usual, no instructions came with this VP products. The top track for the sliding door curtains was not properly bent on one side to match the window profile and screws for the track end caps were not supplied. Otherwise a pretty good product for the money.”

Helpful Report

Posted 2 years ago

“The rails seem well built, but fit very poorly. The bends in the rail were 4-5cm away from the corners on both ends, requiring a lot of manipulation to get them to "fit". The bottom rail was ok, but the top was a real pain. I also had to drill in several additional screws to hold the rail in place while using a rubber hammer to try and get it into shape, as instructed. The end caps were also a nightmare, as the rails had taken a bit of a beating by the rubber hammer. The fabric is ok, although not as thick as that on our other curtains from a different company, so it does let a little bit of light through in the morning. Overall, I can't comfortably recommend these curtains, and think there are better alternatives on the market.”

Helpful Report

Posted 5 years ago

Hello, Many thanks for your review it is much appreciated. All of our curtain kits have pre-bent rails to the rough shape of the panels they are meant for, unfortunately it isn't possible for them to be perfectly bent all of the time however the rails are made from a malleable metal meaning that they can be easily made to match the contour needed using a rubber mallet and then held in place with the supplied fixings, this shouldn't have affected the endcaps. All of our curtains are made from double layers of 100 denier fabric, in some cases bright light can find it's way through but in most instances these offer a great blackout effect. I hope this information helps you, if you need anything please do not hesitate to get in touch with our customer service team. All the best, VanPimps.

Posted 5 years ago