Baseline 3 Mesh is a cost-effective tanking membrane manufactured from high-density polyethylene (HDPE). This mesh faced damp proofing membrane has 3mm studs formed on one face of the product, which are spaced at 20mm centres in both directions. It has a polypropylene mesh welded to the other side, which forms a key for plastering or dot and dab dry lining. This semi-transparent tanking membrane is robust but pliable and can be easily bent around corners and cut with a knife or scissors. It is quick and easy to install: - Fix at 250-300mm centres using mesh membrane plugs fitted into an 8mm hole. - Seal joints with butyl rubber waterproofing tape - Plaster, tile or dot and dab plasterboard sheets directly onto the mesh face. This low-cost tanking membrane is ideal for: - Plastering after the insertion of a damp-proof course, where it is necessary to plaster the walls without allowing a period for initial drying - Wet rooms and showers - Difficult to treat areas of dampness or contamination (disused chimney breasts, high external ground levels, etc.) Baseline 3 Tanking membrane has an overall thickness of 3.5mm with ample air gap between studs to allow walls to breathe or drain. it is available at a special trade price in a 1m x 10m ,1m x 20m and a 2m x 20m roll
Visit Product PagePhone:
3451236006
Email:
sales@twistfix.co.uk
Location:
360 Leach Place,
Walton Summit,
Bamber Bridge
Lancashire
PR5 8AS
