Official Raspberry Pi Zero Case Reviews

4.7 Rating 420 Reviews

Visit Product Page

Email:

contact@thepihut.com

Location:

Mann Enterprises LTDHomefield RoadHaverhill, SuffolkCB9 8QP
Cambridge
CB9 8QP

Visit Product Page

Author didn't leave any comments.

Helpful Report

Posted 1 year ago

“Perfect fit and looks very smart.”

Helpful Report

Posted 1 year ago

Author didn't leave any comments.

Helpful Report

Posted 1 year ago

“A good quality easy on the eye case”

Helpful Report

Posted 1 year ago

“I bought this case for a project with a noir zerocam because from the case pictures it came with a lid that could accommodate the camera. What it also came with was a couple of extra lids to use a pi zero with or without headers, which for the price is excellent. The zero board snaps in to place in the bottom half of the case and is retained by some wedge shaped protrusions from the case sides, whilst being located correctly to allow the ports to be accessed from the back. The underside has a cut out providing access to the header pins (whether or not you have headers fitted). If you are using a zerocam with this case then be aware that the camera doesn't snap into place in the top cover and will either need to be attached with foam sticky pads, or the better option is to create a little plastic loop with some thin plastic material that loops around the board in the base part of the case and provides a springy backing for the camera to attach to. The benefit of this is that it gives an air gap for the board, provides a shock support for the camera, and also disconnects it from the case top plate so you don't rip the cable out when you open it. A fantastic no nonsense case for your projects.”

Helpful Report

Posted 1 year ago

“In my opinion the best case for the Pi Zero. great value, the only modification I do to mine is to drill a small hole to see the activity light.”

Helpful Report

Posted 1 year ago

“Does the job to protect the board, and lets the board clip into place.”

Helpful Report

Posted 1 year ago

“This is a brilliant little case to insert your pi zero into. I bought it for an additional camera to add to my home surveillance system. I’ve used a pi v1.1 and a raspberry pi zero cam. The camera fitted fine but I had to use a piece of tape to secure it ( no problem). All works well! Once I can get some more pi zeros I’ll be buying a lot more of these discrete little cases. Nice one pi hut!”

Helpful Report

Posted 1 year ago