Raspberry Pi 4 Model B Starter Kit 4GB / UK Reviews

4.9 Rating 474 Reviews

Visit Product Page

Email:

contact@thepihut.com

Location:

Mann Enterprises LTDHomefield RoadHaverhill, SuffolkCB9 8QP
Cambridge
CB9 8QP

Visit Product Page

“Excellent starter kit, very simple to setup and use.”

Helpful Report

Posted 2 years ago

“Great starter kit with everything you need to kick start your Pi experience. The SD card comes with the Pi OS preloaded which was a nice feature.”

Helpful Report

Posted 2 years ago

“Perfect to get started”

Helpful Report

Posted 2 years ago

“I ordered the Pi4 kit over the Xmas period and considering the time, it arrived very promptly. The kit itself was very simple to use and it only took me a few minutes to get the kit up and running. I bought the kit as I wanted to create a Pi-hole ad blocker, again it was very easy to set up, there are many good videos on youtube explaining how to set it up. Later, on the advice of a friend, I ordered an Argon Fan/heatsink, which fits nicely inside the case and my temps have stayed a constant 42C since. Overall I'm very pleased with my little project, it hasn't blocked everything, but my internet experience is better and a little faster now.”

Helpful Report

Posted 2 years ago

“Great little hit, using it to try out home assistant to fix some of home automation woes. The only thing I would recommend thinking about, is the micro SD card doesn't have a sd card adapter. luckily 1 of my 3 usbc adapters did have a micro slot so I was lucky.”

Helpful Report

Posted 2 years ago

“First time buying a pi. I've installed home assistant on it and am running automations on it. The device is quick, small and sips power so I have it hidden under the stairs next to the router and access configuration using the web portal. The case is super simple but don't make the same mistake I did. Put to the pi in the case without the microsd card (I snapped the card when I did this) Power supply is tiny and the cable is not detachable from the plug. Works fine. 100% recommend this kit for someone looking to start home assistant dabbling”

Helpful Report

Posted 2 years ago

“Was a good way of actually getting hold of a Pi 4b as the bare boards were all out of stock. All the parts worked well with the exception of the case which needs ventilation holes. As has been written many times, the processor on the bare board of the 4b will run hot under load, without fan or heat sink gets even hotter in the Pi 4 official case which has not enough air flow. So I drilled top and bottom parts of the case with several holes to allow air flow from under the board up and out the top. So easily modded if you have a dremel or small electric drill. But overall other than the case, the kit worked well and the Pi4b is a delight to use.”

Helpful Report

Posted 2 years ago

“An excellent bit of kit. I love that you get everything you need to get started”

Helpful Report

Posted 2 years ago