“Does exactly what it says, connect 2 pHats at once.
I also bought:
1 x Male 40-pin 2x20 HAT Header and
1 x 2x20 pin Female GPIO Header for Raspberry Pi 3/2/B+/A+ (11mm)
- the 11mm pins on the Female header stick up through the Hat Hacker board so that I got 2 x sets of 40 pin conenctors for my 2 pHats to sit on.”
“This very simple idea is a godsend, my RPi project is tight in space so needed to make connections to the GPIO at 90 degrees, just right for the job. Excellent delivery service to Thailand, thanks Pimoroni.”
“Very handy when you have a HAT or pHAT that covers all the pins but only uses a couple.
You need to be able to wield a fine tipped iron as the holes are slightly large and it wobbles about if not soldered :-)
Drawbacks:
1) No case fits this board as it increase the width of the boards
2) It covers the camera connection on the zero so plug that in first
Would I buy again?
YES without hesitation as its better than soldering direct to the board on the rear of the Pi.”
“Ideal solution add a second connection to a Raspberry Pi. I used it to connect external temperature probes to a Pi that was already connected to a 4 letter Phat which was acting as a clock module.”
“Absolutely Love these little boards. Nice to easily run Phats as well as use the spare GPIOs for other devices such as buttons and LEDs! Highly recommend”
