“A nice simple case for my Pi Zero 2 W. It provides some cooling as well as good protection for the Pi. With several spare silicon heat sink pads in case I ever need to pull the board out and put it back in (if I get a set of header pins to solder in, for instance).”
“Fits great and is easy to install and well made. It's cold here now so not sure how much difference in temperature it is making but will continue to monitor when the hotter months roll round.”
“This case is really nice for the Pi Zero 2. It covers the board well, and provides solid protection.
I use this case currently for 2 separate projects.
1. Pimoroni's unicorn hat for the Zero. This case is perfect for that. The hat has no connectors underneath so it sits properly and looks awesome.
The lost star comes from 2 specific drawbacks to this case that were exposed in my second use case.
1. The sd card sticks out of the case about 2.5mm which is an annoyance.
2. It is not suitable for hats that have any kind of connector on the bottom. I'm using this case with the Enviro and Enviro+ hats for the Pi Zero and it causes the boards to sit raised on the GPIO pins. It's not a dealbreaker, but it does cause visual misalignment with one side of the board higher than the other. The result is that the board sits at an angle, and does not look good.
For the Enviro original, it's the display connector.
For the Enviro+ it's the particulate connector.
Overall, I'd happily buy this case again for hats that will sit flat on it. I would not for any hats that have connections of any kind on the bottom.”
“Works great as mentioned in the box. The Raspberry Pi Zero W is now all safe and secure and the temperature is a lot lower now. The box had all the parts required and it had an extra nut/fastener to use just in case we lost any of them. Arrived on time and I loved it.”
