The ZETAPLUS Smart Module is a plug-and-play radio communications solution featuring simple SPI and UART (LV RS232) interfaces. With just a few connections for power, communication, and antenna, users can quickly start sending and receiving data without the need for additional external components.
Thanks to its highly tuned on-board RF matching network, the ZETAPLUS outperforms competing modules, achieving a range that exceeds expectations given its power output and consumption.
Additional features include 64-byte TX/RX FIFOs, preamble detection, a sync word detector, and CRC handling, all of which help reduce current consumption and enable the use of lower-cost system MCUs. The module also provides access to an integrated 11-bit ADC for monitoring battery voltage, simplifying low battery detection in designs.
The ZETAPLUS Smart Module boasts a form factor of 16mm x 18mm and offers a range of up to 2 km with a transmit power of +13 dBm and high sensitivity of -116 dBm at 2.4 kbps. It supports a maximum data rate of 500 kbps and operates within a voltage range of 1.8V to 3.6V, consuming low power with a standby current of just 0.5 nA, 10 mA in receive mode, and 18 mA during transmission at 10 dBm.
The module features a 64-byte FIFO buffer, an integrated battery voltage sensor, and is based on Silicon Labs’ Si4455 chipset. It requires no configuration or external components, making it a fast and effective plug-and-play solution for RF communications. The ZETAPLUS is available in 433, 868, and 915 MHz frequency options.
Phone:
01444227900
