Epoxy Flooring Grey
Permagard Epoxy Resin Floor Coating is a two-part, water-based, durable, seamless finishes, which is primarily designed for general application in all areas of industry where a hard wearing coating is required. Applications include warehouses and production units, food preparation areas, laboratory-clean room environments, and any areas of maximum hygiene, such as operating theatres and breweries.
Floors become easier to clean and substantially more resistant to damage by forklift trucks, chemicals, fuels and lubricants etc. Permagard Epoxy Resin Floor Coating also provides excellent resistance to light chemical attack and do not support fungus or bacterial growth.
Permagard Epoxy Resin Floor Coating also provides a curing membrane to increase the hardness of concrete by enabling full hydration of cement. Permagard Epoxy Resin Floor Coating can be applied to new (green) concrete 7 days after being poured.
Epoxy Resin Floor Coating Benefits
Low-odour
Fast (overnight) curing @ 15 - 20°C
Apply to concrete, cement screed, cement render
Slip resistant finish (when combined with an aggregate)
Resistant to most fuels & lubricants
Hard-wearing
Non-Dusting
Satin finish
Superior colour stability
Superior curing at low temperature
Freeze-thaw stability
Application Areas
Permagard Epoxy Resin Floor Coating is ideal for use in the food industry E.g. dairies, breweries and bakeries where solvent based products are prohibited. The hard-wearing, chemical / oil resistant properties also make Permagard Epoxy Resin Floor Coating ideal for:
workshops
warehouses
supermarkets ( back of house areas )
general light industrial usage
Normally 2 coats is advised for the best results when used as a floor coating. 1 Coat required if used as a primer for other floor coatings. Please note if this product is used as a primer it is not compatible with oils, greases and other chemical surface contaminants. If your surface has surface contaminants like the ones mentioned please use FAS Primer. It is essential to remove any laitance by mechanical means (common on new concrete floors/screeds). Please speak with a technical advisor if unsure. Allow at least 12 hours to dry between coats. No more than 48 hours. This product is not suitable for external application and is not UV light stable so the epoxy can potentially yellow when exposed for longer or intense periods of sunlight.
