Damp Proofing Cream Kit - Bulk Buy
Kiesol C is the next generation Damp Proofing Cream, high strength, high performance, deep penetration, long lasting damp proofing for peace of mind for the home owner.
Kiesol C is the highest strength damp proofing cream in the world with an active ingredient (silane) level of 80% which is more than any other damp proofing cream on the market.
This Kiesol C DPC injection cream kit will cover approximately 30 linear metres of 100mm (4.5 Inch single brick) wall thickness
Kiesol C Damp Proofing Cream Kit Contents:
10 x 310ml Kiesol C High Strength DPC Injection Cream Cartridges
1 x 310ml Caulking Gun
1 x Extension Tube
1 x 12mm x 300mm SDS Drill Bit
Kiesol C Benefits:
Fast to install, generally 2-3 times quicker than conventional high pressure liquid DPC injection methods
Clean and simple installation, low pressure injection ensures correct dosage and less chance of spillage
Highly concentrated active ingredients (80%) ensures high performance
Highly effective, WTA Accreditation ensures permanent protection against rising damp
Kiesol C Installation:
Kiesol C is injected into a 12mm hole drilled into the mortar joint approximately 75mm-150mm above ground level.
The product is then left to revert to its liquid phase and penetrate the masonry surrounding the hole.
As Kiesol C penetrates the substrate it carries the high level of active ingredients into the masonry and these silanes line the capillaries in the substrate to create a water repellent barrier.
This water repellent barrier in the masonry is the new chemical damp proof course and will stop rising damp in the substrate permanently.
Kiesol C Gains WTA Approval
Kiesol C has been approved by the German WTA for the treatment of rising damp in highly saturated walls with a moisture saturation level of up to 95%.
The WTA test method is particularly tough on the product because the test walls are subjected to continual damp with no "dwell period" to assist the curing of the test material. The test can be carried out at three levels of saturation; 60%, 80%, and 95%. Kiesol C passed even when subjected to the most extreme test at 95% saturation proving its high performance even in the toughest conditions.
