An acrylic polymer-based metallised floor polish, which provides gloss with excellent slip resistance. Diamond Contract offers a good level of gloss and an excellent base for floor maintenance. Suitable for use on non-porous floors, including; vinyl, rubber, linoleum, thermoplastic, asphalt, sealed wood, marble and terrazzo. Recommended for use in schools, colleges, hotels, offices, airports, factories, shops, shopping centres, ferries, bars, nightclubs and pubs. PREPARATION: To obtain optimum results, it is important that thorough preparation of the floor is undertaken. The floor must be thoroughly cleaned to remove all dirt, grease and old polish films by using a quality polish remover such as Clover Chemicals' REMOVE or ZIP STRIP. The floor must be well rinsed with water and allowed to dry before applying DIAMOND CONTRACT. APPLICATION: Apply a thin film of DIAMOND CONTRACT (undiluted) using a mop or polish applicator. Drying time is normally around 30 minutes. Apply a second coat and allow to dry. Coverage is dependent on the porosity of the floor covering. In general, 5 litres of DIAMOND CONTRACT will cover approximately 250 square metres of floor. For interior use only.
Visit Product Page
