“Great bed if you have to cram 3 kids in a small bedroom (with high ceilings! you wouldn't want to use this bed if you're ceiling is below 240cm). Assembly was not difficult, but does take time: it took me 3h, by myself. The instructions are clear, the pieces are precisely cut and everything fits into place correctly. The instruction could be improved with sequencing details, especially in places where it's a good idea to install all the screws of a section keeping them loose, before tightening them altogether at the end to make alignments easier. IKEA documentation would be a good inspiration to improve the instructions for this bunk bed. The final product looks very decent and quite imposing, but does save a lot of space in the room. The main issue I have is with the wood slats that support the mattresses: - some (most) are too long and already press on the frame on either side without any weight on them, add a child and the bed frame is bowing out. - there is no knob at either end of the ledger to hold the slats in place (a feature you find IKEA beds for instance), it's a small add and would make installation a lot easier. - and finally: you are expected to screw in every single slat on either side into the ledger, this is a nightmare, especially if you don't have a power driver/drill. The slats are only partly pre-drilled, without countersink, too close to the edge, it makes it just impossible to drive those screws in by hand. You could decide to only screw in 2 slats at either end of each bed (what I did) but because the ledgers are wood and not metal, it creaks quite a bit when you toss and turn at night. I think replacing the ledgers with metal rails, with a knob at each extremity to hold the (better cut and shaped) slats at either end so that it is not necessary to screw in each and every slats would be a major improvement for this bed and would save potentially 1 to 2h of assembly time on the customer's end. Right now, I am NOT looking forward to the day I'll have to move this bed to a new home!”

Helpful Report

Posted 1 month ago

“Great bed if you have to cram 3 kids in a small bedroom (with high ceilings! you wouldn't want to use this bed if you're ceiling is below 240cm). Assembly was not difficult, but does take time: it took me 3h, by myself. The instructions are clear, the pieces are precisely cut and everything fits into place correctly. The instruction could be improved with sequencing details, especially in places where it's a good idea to install all the screws of a section keeping them loose, before tightening them altogether at the end to make alignments easier. IKEA documentation would be a good inspiration to improve the instructions for this bunk bed. The final product looks very decent and quite imposing, but does save a lot of space in the room. The main issue I have is with the wood slats that support the mattresses: - some (most) are too long and already press on the frame on either side without any weight on them, add a child and the bed frame is bowing out. - there is no knob at either end of the ledger to hold the slats in place (a feature you find IKEA beds for instance), it's a small add and would make installation a lot easier. - and finally: you are expected to screw in every single slat on either side into the ledger, this is a nightmare, especially if you don't have a power driver/drill. The slats are only partly pre-drilled, without countersink, too close to the edge, it makes it just impossible to drive those screws in by hand. You could decide to only screw in 2 slats at either end of each bed (what I did) but because the ledgers are wood and not metal, it creaks quite a bit when you toss and turn at night. I think replacing the ledgers with metal rails, with a knob at each extremity to hold the (better cut and shaped) slats at either end so that it is not necessary to screw in each and every slats would be a major improvement for this bed and would save potentially 1 to 2h of assembly time on the customer's end. Right now, I am NOT looking forward to the day I'll have to move this bed to a new home!”

Helpful Report

Posted 1 month ago

Dinuka Wijesinghe

Verified Reviewer

“I recently purchased the Henrik Triple Bed Bunk Triple Sleeper in Classic White for my two young sons, aged 2 years and 1 year, and I couldn’t be happier with the entire experience. To start with, the Noa & Nani website was very user-friendly and easy to navigate. I placed my order late at night, around 11 PM, and was pleasantly surprised when the bed was delivered the very next day! The speed of the delivery was impressive. The delivery service was also top-notch. I wasn’t home when the bed arrived, but the delivery driver was extremely helpful. Despite the weight (two large boxes of 24KG and three smaller boxes of 4.5KG for the slats), he brought everything up to our second-floor apartment and placed them exactly where we wanted. This level of service was much appreciated, especially since my wife was home alone with our two little ones. We didn’t have a chance to assemble the bed until last night, but it was well worth the wait. The packaging was excellent, with foam protecting all sides of the bed. The instructions were clear and straightforward, and all the necessary fixtures were included. My wife and I assembled the bed together, and while it’s definitely possible to do it solo, I’d recommend having a helping hand—especially for the more tedious task of securing the slats. It would have been nice if the slats were designed with a system like IKEA’s, which could have sped up the process. That said, the effort was worth it. The bed is incredibly solid and well-constructed. My eldest son absolutely loves it, and it’s also a safe option for our youngest, who isn’t walking yet. The bottom bunk is low enough that he can easily get off the bed on his own when he wakes up. Overall, I’m very happy with this purchase. The bed looks great, is sturdy, and perfectly suits the needs of our family. I would highly recommend the Henrik Triple Bed Bunk Triple Sleeper to anyone looking for a high-quality, stylish, and practical bunk bed for their children’s room.”

Helpful Report

Posted 2 months ago

Annissa Farine

Verified Reviewer

“Great space saving, functional 3 sleeper with a generous space between the bunks. Would defo recommend to ppl who dont have much room”

Helpful Report

Posted 1 year ago

“Very sturdy and well made. Perfect for our three boys and saves on space. Took quite a while to put together, but straightforward instructions. Needs two people to assemble.”

Helpful Report

Posted 1 year ago

Henrik Triple Bed Bunk Triple Sleeper in Classic White Reviews