LawnMaster Peg Driver for Robotic Lawnmowers Reviews

4.1 Rating 35 Reviews

About Cleva Europe Ltd:

We are the original design manufacturers of the Vacmaster® & LawnMaster® range of high performance appliances for the home, garden and business.

Cleva was born in 2004 by two people who shared a vision to design and manufacture high performance industrial and domestic vacuum cleaners and lawn mowers at affordable prices. Since then, we have grown to a 1200 strong workforce and have manufactured over 40 million appliances. All of which have been designed and manufactured by us, in-house.

Our mission it to bring pioneering design into the heart of the everyday. We listen. We observe. We test and then we test again.
Save and buy direct from the makers at: https://www.cleva-uk.com

Visit Product Page

Phone:

0191 654 0036

Email:

support@cleva-uk.com

Location:

Unit 20 The Chiller, Baker's Yard, Christon Rd,
Newcastle Upon Tyne
Newcastle upon Tyne
NE3 1XD

Visit Product Page

Author didn't leave any comments.

Helpful Report

Jonathan Malthouse

Verified Reviewer

“The Peg driver is good for the final placement of the pegs but I found that you still needed to pull the wire tight and use a mallet to fix the pegs in firmly.”

Helpful Report

“There was no instructions on how to use it or set it up.So I laid the boundary wire by hand which worked out well.It is still in the box if you would like to have it back,as I won't be using it.buy”

Helpful Report

Noel Taggart

Verified Reviewer

“A sturdy piece of equipment that makes setting the boundary wire very easy.”

Helpful Report

Rodney Scaife

Verified Reviewer

“Works well”

Helpful Report

“So far Excellent although I believe the instructions are a little over generous with the 30cm gap between the edge of the grass and the wire. I have reduced tis to 20 with no problem and as the mower straddles this wire only when doing the full circuit I have not encountered any problems. I have some trees and small garden sections ring fenced by the wire and here I reduced the gap to 15cm and the lawnmoer never straddles these sections but just registers it existence when reached and then turns without problems.”