Treatex - Colour Tones Reviews

4.6 Rating 5 Reviews

With 11 natural colours to choose from Treatex colour Tones are an ideal way of bringing colour to your home without hiding the beauty of the wood. Treatex Colour Tones can be used to protect and enhance the appearance of all types of wood surfaces including floors, stairs, doors, furniture and worktops. Benefits Manufactured on a base of natural. sustainable. raw materials including: linseed oil, sunflower oil, jojoba oil, beeswax, carnauba wax and candeilila wax. Read more on the ingredients on our blog. Low odour No sanding needed between coats Water resistant Highly durable Preparation Please ensure this product is applied to bare wood Sand surface to be treated with 80-120 grit sandpaper, ensure that all surfaces are free of any dust, dirt and other contaminants. Application Use a Brush or Roller to apply a thin coat of Colour Tone to the bare wood suface. Immediately remove any excess product with a lint free cloth. Allow to dry then finish with two ...

Visit Product Page

Phone:

01239 777009

Email:

info@celticsustainables.co.uk

Location:

Unit 3,
Parc Teifi,
Cardigan
Ceredigion
SA43 1EW

Visit Product Page

“Colour tones give a nice colour and do not streak. Also easy to apply”

Helpful Report

Posted 6 years ago

“Good product, low odour, good range of colours”

Helpful Report

Posted 7 years ago

“I used the treatex colour tone on two different types of pine which were now part of a single floor, it gave less red/orange than other brands and a consistent colouring over the different woods. I acheived a "doesn't look like it's been done by me" finish by using the matt hardwax oil on top, which was the desired effect!”

Helpful Report

Posted 8 years ago

“Found product easy to apply and consistent absorbtion, didn't raise the grain of my pine floor boards at all, and had good colour depth. Preferred the finish of the matt hardwax oil to the satin/semi-gloss.”