Type of product: Heater assembly Make and Model: Balboa Power: Volts: 230 Hz: 50 KW: 3.0 Amps: 11.5-12.0 Specification Sensor compatibility: M7 24" x 2 Material spec: Incoloy Required flow rate: 21gpm Flow detection: M7 Technology by using a sensor at each end of the heater assembly Compatible with: GS500, GS500Z, GS501, GS501Z (with 3.0KW on label only), GS501SZ, GS510, GS510S, GS510Z, GS510SZ, GS511SZ, GS523DZ, GL2000 mach 3, GL2001 mach 3 and more Connections / Fixings: Usually held in with two fixing studs, one at the top and one underneath. 2" white plastic female sockets to connect to plumbing Dimensions: Heater length: 15 inches Heater Diameter: 2 inches Between terminals: 1.25 inches Overall length complete: 19.5 inches Additional notes: You may find cheaper versions of this heater on the internet but they are most likely cheap copies. If it is not an official Balboa product with genuine labeling do not buy it. If your heater looks the same as this one it most probably is but contact us if you need further help.
Visit Product PagePhone:
01348840509
Location:
Hayscastle
Haverfordwest
SA62 5QG
